CCPSD series 21W Constant Current LED Driver - DiodeDrive® - 1400mA

CCPSD series 21W Constant Current Driver - 1400mA - 9-15 VDC - IP65 Waterproof

Name: CCPSD series 21W Constant Current Driver - 1400mA - 9-15 VDC - IP65 Waterproof
Brand: Super Bright LEDs
SKU: CCPSD-21W-1400
Price: 19.99 USD
Availability: InStock

Part Number

CCPSD-21W-1400

Features

Class 2 Constant Current
Fully enclosed body
Fanless design
0–10V dimmable
Weatherproof IP65
21-watts | 1.4 A output
5 year warranty

View more details

Free Shipping

On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify

Skip to the end of the images gallery

3 photos

Skip to the beginning of the images gallery

Overview

CCPSD series Constant Current Driver from DiodeDrive is a reliable power solution for a wide range of projects. Durable construction maintains an IP65 rating for indoor or outdoor application. High efficiency of 86% and fanless design allow this device to operate with in a wide temperature range. Can be used to replace an existing driver. Please check voltage and wattage of the previous driver to make sure this is a compatible replacement.

Product Details:

120-277 VAC input
18 AWG input/output wires, 20 AWG dimming wires
2kV surge protection
Built-in short-circuit, overload, open-circuit, and over-temperature protection
UL Recognized, FCC approved

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

Class 2

Class 2 power supplies must meet the National Electric Code (NEC) and Underwriters Laboratories (UL 1310) standards for wiring requirements and power limitations of AC/DC power supplies to minimize shock or fire risks. All Class 2 power supplies must meet the NEC overcurrent protection and wiring sizing regulations. They must be constructed with ‘In-Wall’ rated wiring for permanent installation inside walls or floors, where they may be surrounded by insulation. These wiring requirements help prevent cracking or melting of the wire, which could cause a fire hazard. These power supplies must have a maximum power capacity of 100 VA and cannot exceed a 30 VAC or 60 VDC output, minimizing the risk of electric shock or overheating from excessive currents.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

Specifications

Ambient Operating Temperature Range	-40~+50 °C (-40~+122 °F)
Brand	DiodeDrive
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact, energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else who may be involved confidence that the product is safe and will work well in their application. UL and ETL certifications relate to safety and installation and are the most common for power supplies.	Class 2, FCC, UL Recognized
Dimmable	Yes
Dimming Control TRIAC Dimming: This is the most commonly recognized dimming type, with TRIAC Dimmers found in most Home Centers and hardware stores. TRIAC (TRIode for Alternating Current) dimmers operate by modifying the voltage waveform, reducing the amount of power input to the device being controlled. Reducing the input power will result in a corresponding reduction in a power supply's output voltage/current or a decrease in the lumen output of a light fixture. TRIAC dimmers come in two variations: Forward Phase and Reverse Phase MLV (Magnetic Low Voltage): Also known as Leading Edge or Forward Phase Dimming, this type of dimming controls the amount of power delivered to the load by chopping off the leading edge of the AC waveform, reducing the power supplied and thus dimming the output. ELV (Electronic Low Voltage): Also known as Trailing Edge or Reverse Phase Dimming, this type of dimming controls the amount of power delivered to the load by chopping off the trailing edge of the AC waveform. These dimmers can result in smoother dimming performance, reduced flicker, and reduced hum, especially with electronic low voltage (ELV) lighting. 0-10V Dimming: This type of dimming control is most commonly found in commercial applications. It works by varying a voltage from 0 to 10 VDC on dedicated dimming wires. The output of a power supply or light fixture is proportional to the voltage applied. Pulse-Width Modulation (PWM) Dimming: This dimming control adjusts output by rapidly turning the output on and off at a fixed frequency. The proportion of on-time to total time sets the dimming percentage. Potentiometer Dimming: Potentiometer dimming varies the output using a variable resistor, or potentiometer, to set the dimming level.	0-10V, Potentiometer, PWM
Environmental Rating	Suitable for Damp Locations, Waterproof
Input Connection Type	Pigtail
Input Voltage	120-277 VAC
IP Rating	IP65
Material	Aluminum Housing, Galvanized Steel Top
Output Current	1.4 A
Output Voltage	9–15 VDC
Surge Protection	2 kV
Warranty	5 Year

Print Specifications

Accessories & Power Supplies

Reviews

0 / 5 stars

0 reviews

Customer Submitted Photos

Write Your Own Review

Write a Review

You're reviewing: CCPSD series 21W Constant Current Driver - 1400mA - 9-15 VDC - IP65 Waterproof

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

DiodeDrive reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs