Thin Constant Voltage Power Supply - 24 VDC - 30W / 60W / 96W
Part Number:
DVP-xW-24V
Manufacturer Part Number:
Starting at
$27.99
ea.
Starting at
Was
Features
- UL Power Supply: Class 2, Class P
- Standard form factor with a slim profile for space-restricted installations
- Universal AC input with a single 24V DC output
- Dedicated input/output compartments for neat, concealed wiring
- UL Listed for safety and compliance
Overview
The Thin Constant Voltage Power Supply features a thin profile, perfect for installation in tight spaces. Its constant 24V output increases the longevity of connected devices. The design includes separate input and output compartments for concealed wiring, each with terminal block connections. The input can be hardwired or connected using the optional power cable with a 1-15P plug. Also available in a linear form factor.
Product Details:
- IP20, suitable for damp locations
- 2 kV line to neutral surge protection
- Universal AC input 100-277 VAC
- 5-year warranty
Documents
DVP and DVPL Specification Sheet Applications:
- Home Interiors
- Light Bars
- Stage & Theaters
- Strip Lights
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Class 2
Class 2 power supplies must meet the National Electric Code (NEC) and Underwriters Laboratories (UL 1310) standards for wiring requirements and power limitations of AC/DC power supplies to minimize shock or fire risks. All Class 2 power supplies must meet the NEC overcurrent protection and wiring sizing regulations. They must be constructed with ‘In-Wall’ rated wiring for permanent installation inside walls or floors, where they may be surrounded by insulation. These wiring requirements help prevent cracking or melting of the wire, which could cause a fire hazard. These power supplies must have a maximum power capacity of 100 VA and cannot exceed a 30 VAC or 60 VDC output, minimizing the risk of electric shock or overheating from excessive currents.
Class P
Class P is a UL-listed program that allows manufacturers to substitute compliant LED drivers without recertifying their products. It has established guidelines for evaluating and testing standardized LED driver designs and ratings to meet nationally accepted safety standards (including UL 8750) and be free of a reasonably foreseeable fire risk, electric shock, or other hazards. This program offers manufacturers flexibility, cost savings, and faster market access by enabling driver exchanges without recertification.
Specifications
| Ambient Operating Temperature Range | -20~+45 °C (-4~+113 °F) |
|---|---|
| Brand | DiodeDrive |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact, energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else who may be involved confidence that the product is safe and will work well in their application. UL and ETL certifications relate to safety and installation and are the most common for power supplies. |
Class 2, Class P, UL Listed |
| Dimmable | No |
|
Dimming Control
Dimming Control
TRIAC Dimming: This is the most commonly recognized dimming type, with TRIAC Dimmers found in most Home Centers and hardware stores. TRIAC (TRIode for Alternating Current) dimmers operate by modifying the voltage waveform, reducing the amount of power input to the device being controlled. Reducing the input power will result in a corresponding reduction in a power supply's output voltage/current or a decrease in the lumen output of a light fixture. TRIAC dimmers come in two variations: Forward Phase and Reverse Phase
0-10V Dimming: This type of dimming control is most commonly found in commercial applications. It works by varying a voltage from 0 to 10 VDC on dedicated dimming wires. The output of a power supply or light fixture is proportional to the voltage applied. Pulse-Width Modulation (PWM) Dimming: This dimming control adjusts output by rapidly turning the output on and off at a fixed frequency. The proportion of on-time to total time sets the dimming percentage. Potentiometer Dimming: Potentiometer dimming varies the output using a variable resistor, or potentiometer, to set the dimming level. |
Non-Dimmable |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Damp Locations |
| Input Connection Type | Screw Terminals |
| Input Voltage | 100-277 VAC |
|
IP Rating
IP Rating
|
IP20 |
| Output Connection Type | Screw Terminals |
| Output Voltage | 24 VDC |
| Warranty | 5 Year |
| Part NO | Output Current |
Output Power
Output Power
A power supply's power consumption is measured in watts and refers to the maximum amount of power it is capable of delivering. For best results, choose a power supply that offers a minimum of 20% wattage overhead for your application. Wattage overhead ensures that your project will function correctly, extends the life of the power supply, and offers greater design flexibility by allowing for project expansion. |
|---|---|---|
| DVP-30W-24V | 1250 mA | 30 Watts |
| DVP-30W-24V(POWERCORD) | 1250 mA | 30 Watts |
| DVP-60W-24V | 2500 mA | 60 Watts |
| DVP-60W-24V(POWERCORD) | 2500 mA | 60 Watts |
| DVP-96W-24V | 4000 mA | 96 Watts |
| DVP-96W-24V(POWERCORD) | 4000 mA | 96 Watts |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
DiodeDrive reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
